What is the difference between chrome plating, nickel plating and zinc plating?

First, let’s understand what is electroplating.
Electroplating uses the principle of electrolysis to coat a thin layer of other metals or alloys on the surface of certain metals. Such as rust), improve wear resistance, electrical conductivity, reflectivity, corrosion resistance (copper sulfate, etc.), and enhance aesthetics.

Electroplating is further divided into specific processes such as copper plating, gold plating, silver plating, chrome plating, nickel plating,g, and zinc plating. Manufactured, zinc plating, nickel plating, and chrome plating are the most widely used. And there must be some difference between the three, right? aluminum machining

 

Galvanized

Definition: Galvanizing refers to a surface treatment technology that coats a layer of zinc on the surface of metals, alloys, or other materials for aesthetics and rust prevention.
Features: low cost, general anti-corrosion, silver-white color.
Applications: Screws, circuit breakers, industrial supplies, etc.

 

Nickel plated

Definition: A method of plating a layer of nickel on metal or some non-metals by electrolysis or chemical processes called nickel plating.
Features: beautiful, can be decorated, has a high price, and is a slightly complicated process. The colors are silver, white, and yellow.
Applications: energy-saving lamp caps, coins, hardware, etc.

 

Chrome

Definition: Chromium is a bright white metal with a slight bluish color. It is a method of plating a layer of chromium on a metal or some non-metal by electrolytic or chemical processes called chrome plating.
Features: There are two kinds of chrome plating; the first one is for decoration; the appearance is bright, the wear resistance is better, the rust resistance is not as good as galvanized, and it is worse than oxidation; the second is to increase the hardness and wear resistance of metal parts, etc., which is the functionality of the part.
Application: Bright decorative parts, tools, faucets, etc., on home appliances, electronics, and other products. auto machining

As for the most fufundamentalifference between the three types of electroplating
1: “Chromium plating mainly improves surface hardness, beautiful appearance, and rust prevention. Chromium plating has good chemical stability and does not work in alkali, sulfide, nitric acid,d, and most organic acids. Still, it is soluble in hydrohalic acid ( Such as hydrochloric acid) and hot sulfuric acid. Because chromium does not change color, it can maintain its reflection ability for a long time and is better than silver and nickel. The process is generally electroplating.
2: Nickel plating is mainly wear-resistant, anti-corrosion, anti-rust, and generally thin, and the process is divided into two categories: electroplating and chemical.
3: Galvanized is mainly beautiful and rust-proof. Zn is an active metal that can react with acids, so it has poor corrosion resistance and is the cheapest of the three.
The difference is that chrome plating is the most expensive, nickel is second, and zinc is the cheapest. Among them, rack plating, barrel plating, etc., are also distinguished. Rack plating is costly, and barrel plating is more affordable.
After nagging so much, some friends said that it is still the same silly and unclear, so the editor can only tell you that I will be confused after nagging for a while, so let’s distinguish by color.
Chrome plating is bright white; nickel plating is a little yellow, galvanized silver white (, there are also colored zinc, gray zinc, matt chrome, bright chrome, white nickel, black nickel, etc., the more you say, the more stupid you are. clear)

Expand your knowledge:
1- Electroplating production is mainly dominated by sewage and heavy metal pollution in sewage. The state has strictly controlled the expansion of the electroplating industry, and it has been reduced year by year.
2- The electroplating processing in my country is mainly galvanized, copper-plated, nickel-plated, and chromium-plated, of which zinc-plated accounts for 50%, and copper-plated, chromium-plated and nickel-plated accounts for 30%.
3- If the purpose is to prevent rust, zinc or cadmium plating can be used; if the focus is to pavoidwear, nickel or chrome plating is the best choice.

Electroplating is a profound knowledge, and it is not clear in one sentence or two d  the plating method of each material is different, such as pre-plating treatment, electrolyte formula, current size, electroplating time, etc,; This leads to changes in the quality of electroplating, aside from other things, the current is smaller and the electroplating time is longer, so that the quality of the plated products is better, which means that it is a little slow to boil. Of course, the cost is also rising.Aluminumm machining parts

Anebon Metal Products Limited can provide CNC Machining、Die Casting、Sheet Metal Fabrication service, please feel free to contact us.
Tel: +86-769-89802722 E-mail: info@anebon.com URL: www.anebon.com