News

Thread Milling Cutter

  The traditional thread processing method mainly uses a thread-turning tool to turn the thread or uses taps, die manual tapping and buckle with the development of CNC machining technology, especially the emergence of the three-axis CNC machining system, the more advanced thread machining method ... Read More

Metal Heat Treatment

The metal heat treatment is to heat the metal or alloy workpiece to a suitable temperature in a certain medium, and after maintaining the temperature for a certain period of time, it is cooled in different media at different speeds, by changing the surface or interior of the metal material. A pro... Read More

Briefly Introduce The Type Characteristics Of The Lower Milling Cutter Bushing

The environment in which the cutter rod bushings are supported is inferior to the cutting tool. Usually, when designing and manufacturing the milling cutter bar, it is rarely considered how to properly install, fit and calibrate its precision bearings. As a result, the knife, the vibration, etc. ... Read More

202 Stainless Steel

202 stainless steel is one of the 200 series stainless steel, the national standard model is 1Cr18Mn8Ni5N. 202 stainless steel is widely used in architectural decoration, municipal engineering, highway guardrails, hotel facilities, shopping malls, glass handrails, public facilities and other plac... Read More

How to make the processing meet the requirements?

This requires a specific look at what materials are being processed, processing parameters, machine tool and fixture stability, and even the use of cutting fluid, etc., and the final finish is the result of every step in front of these systems. So I suggest: 1. first look at what material is proc... Read More

Ten Tips For CNC Cars

1. It is skillful to obtain a small amount of deep food. In the turning process, the triangular function is often used to process some workpieces with inner and outer circles above the secondary accuracy. Due to the cutting heat, the friction between the workpiece and the tool causes the tool wea... Read More

CNC System

The digital control system is abbreviated as the English name. The English name is the Numerical Control System. In the early days, it was developed in parallel with the computer. It is used to control the automatic processing equipment. The hardware controller and relays are used to form a dedic... Read More

CNC milling machine assembly method.

一, the installation of CNC milling machine: The general CNC milling machine is a mechatronics design. It is shipped from the manufacturer to the user, and is shipped in the whole machine without disassembly. Therefore, after receiving the machine tool, the user only needs to follow the instructi... Read More

Precision machining requirements for materials

1. Requirements for material hardness In some cases, the higher the hardness, the better the material, but for the machining of precision mechanical parts, the material can only be limited to the hardness of the lathe turning tool. If the material is harder than the lathe turning tool, it cannot ... Read More

Other fixture classification in cnc machine tools

There are many fixtures used in actual production, and there are many classification methods. It can also be divided into lathe fixtures, milling fixtures, etc. according to the process of using the fixtures; it can also be merged into the following categories according to the characteristics of ... Read More

Trampoline Knowledge

Definition of trampoline: Machine tools with prefabricated holes are mainly machined on the workpiece with a file. Subject: Mechanical Engineering (a subject); cutting process and equipment (two subjects); metal cutting machine tools – various metal cutting machine tools (three subjects) Th... Read More

How to determine metal plating?

1 look at the appearance The coating has the same color and fine crystal structure; the coating has no blistering, peeling, pinhole and charring; no obvious roughness and burrs; no obvious water marks and fingerprints. 2 plating thickness The thick plating of the main surface is in accordance wit... Read More
<< < Previous 124125126127128129 Next > >> Page 127 / 129