1. Machine accuracy, if the machine’s accuracy is at least 0.01mm, then the product with a precision of 0.001mm cannot be machined on this machine.
2. Clamping: Select the appropriate clamping process according to the workpiece material, and the clamping force is moderate. For example, the processing of long shafts uses “one top and one clip”, using a center frame or a tool holder. The thin-walled sleeve is machined with a soft claw or a split loop.
3. Tool: Select the appropriate tool and the appropriate tool tip angle according to the nature of the material being processed. Also pay attention to the wear of the tool during the machining process.
4. Processing: Develop a suitable processing technology according to the nature of the material. Rough, semi-finished, and refined cars, different chips and feeds are selected at different stages. Cooling is also important during processing. Select the appropriate coolant (saponified liquid, emulsion, oil) according to the material and tool. Wait)
5. Trial processing, make adjustments according to the finished product of the trial processing.
The following products are our latest development project products:
Please come to our site for more information. www.anebon.com